Description of the pin configuration for the RS232 serial connector, commonly featuring 9 pins for communication between devices.
Microchip, 8bit Pic Microcontroller, PIC12F, 8Mhz, 1K Flash, 8-Pin SOIC, PIC12F510
ARM® Cortex®-M0+ NXP Kinetis KE04 Microcontroller IC 32-Bit Single-Core 48MHz 44-LQFP
Raspberry Pi GPIO Pinout
Shift Register 8 Bit 16-Pin SOIC, PDIP, SO, CDIP, SSOP, or TSSOP .
800-mA 15-V linear voltage regulator,4-Pin SOT, 3-Pin TO-220,3-Pin TO-263,3-Pin TO-252
5-V dual channel 120kbps RS-232 Transceiver Full RS232 16-SOIC MAX232: D, DW, N or NS Package MAX232I: D, DW, or N Package
Jetson Nano Dev-Board Expansion Header Pinout
Standard USBASP Pinout for In-System Programming (ISP).
J-Link / J-Trace JTAG pinout.
J-Link / J-Trace SWD pinout.
4N35 General Purpose Phototransistor Optocoupler.
Pickit 3 Programmer/Debugger Pinout
4.5V to 40V, 3A Low Component Count Step-Down Regulator.
BC547 NPN Transistor Pinout
BC557 PNP Transistor Pinout
Module that supports 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth® 5 (LE), Zigbee and Thread (802.15.4) Built around ESP32-C6 series of SoCs, 32-bit RISC-V single-core microprocessor Flash up to 8 MB 23 GPIOs, rich set of peripherals On-board PCB antenna or external antenna connector
2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE) module Built around ESP32-S3 series of SoCs, Xtensa® dual-core 32-bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 16 MB Up to 36 GPIOs, rich set of peripherals On-board PCB antenna or external antenna connector
USB A Male Pinout
USB B Male Pinout
WIZnet WizFi360-PA WiFi 802.11b/g/n Transceiver Module, 2.4GHz ~ 2.4835GHz, Integrated Trace, Surface Mount.
